"Sarge Knows"
When it comes to food and beverage procurement strategy, it is highly
recommended that a restaurant, hotel or food service operation consider
establishing a distributor prime agreement to mange their food service distribution
costs. The typical distributor prime agreement will require eighty percent of
purchases to be made from the prime vendor, along with other contractual
considerations that seek to address supplier costs. By working with a food service
distributor to address these costs, mutual benefit can be achieved that will result in
lower costs for the food service operator. Once executed, distributor prime
agreements enable food service operators to focus their efforts on running the
business, rather than constantly bidding out products and tracking price
fluctuations. Further, a distributor prime agreement will typically improve overall
operational and product consistency. There are a number of critical considerations,
however, that should be addressed during the negotiation of any food service
distributor prime agreement.
Pricing Structure
Obviously, one of the most important considerations in negotiating a food service
distributor program is establishing an advantageous pricing structure. There are
two common distributor prime agreement pricing strategies: "cost plus fixed price"
and "cost plus percentage."
Under the fixed price model, the distributor adds a fixed amount to each product
purchased. For example, if an operator negotiated a $2.30 per case mark up, then
each case would be marked up by this amount over the distributor's cost. In other
words, if an operator bought a case of canned tomatoes that cost the distributor
$20.00, then the invoiced price to the operator would be $22.30. This is a very
common pricing structure for national food service chain distributor master
agreements, but is much more rare in street level food service programs.
Sometimes, a distributor prime agreement will incorporate both pricing models;
fixed price for price‐stable products and percentage mark up for those products
with volatile pricing. Whenever possible, Food Buyers Network recommends that
operators try and negotiate a cost plus fixed price agreement. Having a fixed cost
agreement has the benefit of not resulting in increased distribution costs when
product prices trend upwards. Further, a cost plus percentage prime agreement
creates an incentive for the distributor to sell more expensive products to a food
service operator than what is necessary.
When negotiating a fixed price contract, it is important to determine the average
price per case so that the effects of the proposed agreement can be better
understood. Calculating the average price per case can be easily achieved by
dividing the total amount spent on food for a previous quarter and dividing it by the
number of cases received during that time period. For example, if a restaurant
spent $500,000 in food during the prior quarter, and the number of cases purchased
during this period were 20,000, then the average price per case would be $25.
Calculating the average price per case will provide a better understanding of any
proposed fixed price mark up. If in the above example a distributor proposed a
$2.50 fixed price mark up, then this would translate into an average 10% mark up.
Unfortunately, it is not always as cut and dry when determining these figures. If a
prime agreement establishes varied mark ups by product category, then the
previous analysis would need to be calculated by category, rather than total spend.
Once the average mark up percentage is established for each category, it is relatively
easy to calculate the overall percentage mark up by looking at the category blend.
Mark Up versus Margin
While a percentage mark‐up is the difference between the product cost and the
invoice price, the margin is the percentage difference between the invoice price and
the profit. This may seem very confusing, but the example below will illustrate this
critical difference.
Exhibit 1.
Mark‐Up Contract
Markup Percentage = Gross Profit Margin/Unit Cost
Cost Mark up Invoice Price
$40.00 15% $46.00 ($6.00 gross profit margin)
Margin Contract
Gross Margin Percentage = Gross Profit Margin/Sales Price
Cost Margin Invoice Price
$40.00 15% $47.06 ($7.06 gross profit margin)
As Exhibit 1 indicates, a 15% mark‐up contract will be $1.06 cheaper per case for a
$40.00 product than a 15% margin contract. When negotiating and reviewing
distributor prime agreement contract bids, it is critical to understand whether a
contract is based on a mark‐up or margin. For example, a distributor 15% margin
contract may seem better than a 16% mark‐up because of the lower percentage, but,
in fact, the 16% mark‐up contract is the better option. Not understanding this
distinction can result in a 2‐3% loss in profitability.
Defining Cost
Once the pricing structure is determined, the next big hurdle is defining cost. In
almost all cases, a distributor prime agreement will define cost as the distributor's
cost before deducting any off‐invoice discounts they receive. These off‐invoice
discounts are allowances that distributors receive from the manufacturer for the
specific products purchased by the food service customer. These allowances, or
rebates, are "off‐invoice" so that all cost plus contracts are not based on the
distributor net cost after the allowances are deducted, but rather on the larger
invoiced cost of the products. To help further ensure that operators do not claim
stake to these allowances, Sysco has renamed these allowances "earned income" to
dissuade operators from attempting to tap into this revenue stream.
In some cases, operators will be able to negotiate a prime agreement that defines
cost as the net product cost after these allowances have been deducted, but this is
very rare for restaurant street level agreements. Because of the impact that these
back end allowances can have on distributor profitability, prime agreements will
also typically state that operators are not eligible to take advantage of supplier
rebate programs. This is because the rebate allowance earned under these supplier
programs will typically reduce the supplier allowance received by the distributor.
Operators can typically get such a clause removed from a prime agreement during
the negotiation process, however.
Market Basket
Determining only the prime agreement pricing structure is not sufficient when
evaluating the overall strength of a particular distributor prime agreement contract.
Two competing prime agreements that have the same mark up and the same cost
definition will not result in the same product pricing. Each distributor is able to
negotiate different manufacturer pricing based on their overall product purchasing
volume. Because of this, certain distributors may be strong in some categories and
week in others, based on the specific purchasing profiles of their food service
customers. Therefore, it is important to ensure that a potential supplier is
positioned best in the market for the specific product needs of an restaurant or food
service operation.
The best way to determine this is by requiring a market basket report during the
negotiation process. A market basket report will look at your top twenty to thirty
products and provide the theoretical pricing under the proposed contract for a
historical time period (usually the last complete month). It is important to ensure
that each distributor submitting contract bids completes the market basket for the
same historical time period so that accurate pricing comparisons can be done. Using
these reports, operators can compare the value of competing contracts, as well as
compare the contracts to past pricing.
Drop Size Thresholds
Negotiating a valuable prime agreement is only possible when a food service
operator considers the food service distributor costs, as well. By lowering supplier
costs, operators are able to achieve additional value. One of the most effective ways
that an operator can reduce distributor costs is by managing the delivery drop size.
This often means that an operator will agree to order less frequently to increase the
amount of each delivery. In other words, a restaurant that was ordering three days
a week prior to the prime agreement may agree to limit deliveries to only two days a
week. Further, it is common for a prime agreement to create drop size bracket
incentives which lower the mark up of products based on the drop size of each
delivery.
Supplier Deviated Prices
It is absolutely critical that any prime agreement provide a restaurant or food
service operation with the right to negotiate pricing directly with manufacturers,
and that any negotiated manufacturer pricing will be respected by the distributor
and invoiced as deviated prices. By negotiating pricing directly with suppliers,
operators are able to get product pricing on key products that is often better than
the distributor cost (before backing out the off‐invoice allowances). Because these
deviated prices often reduce or eliminate the off‐invoice allowances that a
distributor receives from the manufacturer, a standard prime agreement will not
allow this practice unless an operator negotiates for it.
Audit Privileges & Data Rights
It is important that any distributor prime agreement include audit privileges by the
restaurant or food service operator. In a standard audit privilege clause, an
operator will be able to provide notice to the distributor that they wish to audit the
cost of specific products to ensure that the restaurant is being billed properly.
Often, the distributor will provide a limit to the number of products that can be
audited.
As technology advances in the food service industry continue to be made, it is
important to include a data rights clause that will require a distributor to provide
your purchasing data to any third party that you engage to audit your invoices. By automatically auditing each invoice line item to ensure proper billing. To enable this process, distributors must provide the purchasing data via an EDI feed to the third party contract monitoring company. Even if you are not sure whether you will utilize such services, it is important to include this clause in the contract so that you have the flexibility to use such services in the future.
Term/Out Clause
It is our recommendation that every prime agreement have a thirty or sixty day out
clause that enables the termination of the agreement for any reason. That being
said, you may be able to get a better contract with out such a clause. If you are
willing to lock in for a period of time without the option of switching distributors,
our advice would be to negotiate the best agreement you can with the out clause in
place, and then ask for a better deal at the end if you agree to strike the clause.
Payment Terms
Understanding the cost of extending credit to a restaurant needs to be taken into
consideration by the food service operator. Agreeing to shorter payment terms will
typically result in the ability to achieve a reduced mark up on your products.
Further, it is recommended that an operator negotiate an incentive for payments
made quicker than the contracted payment terms call for. For example, a contract
that requires the payment of invoices within thirty days should have an incentive
clause that reduces the mark up should the business pay specific invoices within
fourteen days. Having this incentive enables a business the flexibility to pay faster
when cash flow allows and reduce the cost.
Special Orders & Slotting
The prime agreement should require the distributor to stock particular products
required by a restaurant that are not normally stocked in the distributor warehouse.
Typically, there will be minimum usage requirements that an operator will need to
abide by for such products. Twenty cases per month is a typical threshold.
Substitutions
It is recommended that the distributor prime agreement address the substitution
policy for products that are out of stock. Typically, operators will require
notification prior to delivery of substituted products when the cost of the product
exceeds a set threshold, such as two percent. Further, it is not uncommon to set an
acceptable threshold for how often products can be substituted.